Whirl, Reverse/Whip

janis · Post by **janis** » 25 May 2006 22:52

Reverse Whirl/Whip
SET > OP OUT WHIRL [DEX] > OP CLIP [XBD][DEL]
http://www.hackrifice.com/moves/3whirlrev.wmv

Yeah, I've just started doing rev whirls, they are fine from toe set but clipper set really sucks, any tips?
thx in advance

gatapia · Post by **gatapia** » 26 May 2006 01:13

Hey Janis,

I might be able to help out with rev whirl. As for rev whirr, well thats a whole other beast that I personally think is close to impossible (or at least bloody hard).

k, been drilling this a fair bit so...

- Low staright set. (thigh to waist high)
- plant setting foot as fast as possible.
- settle yourself, watch how high you did set (esp for conseq)
- When the bag is about thigh or knee high start the dex.
- Do the dex very fast (unlike whirl, rev whirl has to be done very low)
- As your dexing get your stalling clip in position and fully cranked
- cushion the stall as your dex foot slams the floor (with your toes)
- set low again
- repeat

A few extra things.
try to stay ontop of the bag and balanced.
The dex is easier if its slightly behind you
So for far conseq you want to plant quick and position yourself so the bag falls slightly behind you on the opp side.

And finally and prolly the best tip I will give.

Forget rev whirr

Guido

janis · Post by **janis** » 26 May 2006 05:46

Thx Guido

one thing I forgot to mention, I find rev whirling rake much easier than rev whirl, any ideas as to why that would be

Uranos · Post by **Uranos** » 27 May 2006 19:03

Rev Whirl:

- You should be able to hit at least 15-20 ss clippers before you do this trick.
- Set straight, not too high, aroung knee height.

Ive hit about 10 or so in a row on bs, and ive come close to rev whirr. Ill show you some today

habitat · Post by **habitat** » 28 May 2006 15:20

Uranos wrote:You should be able to hit at least 15-20 ss clippers before you do this trick.

Nah, I don't agree with that. Although I get what your saying

janis · Post by **janis** » 28 May 2006 18:04

Uranos wrote: - You should be able to hit at least 15-20 ss clippers before you do this trick.

Yeah, I can do about 15 ss clippers strongside, but usually I do a toe set rev whirling rake

janis · Post by **janis** » 28 May 2006 18:05

yeah, I'm gonna try some more rev whirls next shred
Thanks for all the tips guys

gatapia · Post by **gatapia** » 28 May 2006 21:32

If you like rev whirling rake have a look at TNT sessions (Jorden). He does one in that (thanks Ian for pointing that out).

I personally think its an ugly move because it looks like your just hopping over the bag and doing a toe stall. However if you make it look more X-Body rake I'm sure it would have its charm. Regardless its still quite a simple raking move if you think of it the way Jorden does it (just a hop into a toe stall).